Hinged-Top Waterfall Dresser

When I see a beautiful piece of unpainted furniture, I am often torn between wanting to keep the original wood, and wanting to paint it. Sometimes I make my decision based on the style of furniture. For example, something that screams 1970s is the worst of ways might look fresh and modern with a clean, glossy coat of paint. Other times, I find pieces that are so hopelessly beat up that only people who enjoy cruel and unusual punishment would attempt to refinish the wood.

That’s what happened when I stumbled upon this waterfall dresser on craigslist. It needed some serious help. Veneer was missing all over the place, the top had something crusted onto it, and a piece of the frame was missing between the top drawer and top of the dresser.

It was actually that missing piece that sold me. Seeing that 2 inch gap between the uppermost drawer and the dresser top made me realize just how much wasted space was in there. “I could do something with that space,” I thought to myself. So I went and picked her up in my trusty little Fiona Fit.

At first I planned to chip off all the veneer from the drawers and the top. That proved to be nearly impossible, even when I used vinegar mixes that were supposed to loosen the adhesive.  I ended up sanding the veneer off the drawers. Underneath the veneer was some kind of porous wood that had holes all over it (not just grain, but real holes). I filled the holes with wood filler, sanded them, and repeated the process. I also used some wood glue and clamps to tighten the drawer joints a bit.

After tackling the drawers, I got to work on the frame. The first thing I did was remove the top by unscrewing all the places it was connected to the frame and using a rubber mallet to gently loosen any areas that were glued down. Because so much of the veneer was left on the top that I couldn’t chip off, I sanded it down with my power sander as much as possible and then used wood filler to level out the places where the veneer was missing. This took a lot of layers of wood filler and sanding to get a good smooth finish. I used a sanding wedge to try and get a level surface.

Once I had tackled the top, I got to work on constructing the replacement piece for the frame. I couldn’t find 2 inch molding in the style I needed, so I glued two pieces of small dental molding and a couple pieces of wood from Home Depot together to make the top piece. Then I drilled a pocket hole with my mini kreg jig on either side so that I could attach the new piece to the frame. I also filled any cracks in my puzzle of molding to make it look like one piece. I used Kregg screws to attach the piece to the frame.

Then came the fancy part. I decided to build a shelf in the top of the dresser to utilize all that dead space at the top.  To do this, I had pieces of wood cut the size of the inside of the frame, drilled pocket holes in the them, and screwed them into the frame. Then I had a piece of higher-quality plywood cut to slightly smaller than the inside of the frame. When I got home, I used my Dremel Multimax saw attachment to cut out corners in the shelf to accommodate the four corners of the frame. To hide the gaps between the frame and the shelf, I cut small pieces of molding and glued them along the frame. It was a process, but it was oh-so-satisfying once I finished. Unfortunately I was so focused on building that I did not take a single picture of the process. Fail.

Once I built the frame, it was finally time to start painting. At first I primed everything with Zinsser Cover Stain, which I had read from various sources was the best primer to use. But the wood grain on the drawers was SO pronounced, and you could see where it was interrupted by the wood filler spots, so I did some research and found that if you really want to seal wood grain, you should use Zinsser BIN, which is shellac-based. So I used two coats of Zinsser BIN primer over the drawers and the whole frame to seal the wood. Shortly after, I purchased my Benjamin Moore Advance paint and read that it should only be painted over oil-based primers, not shellac-based primers or “undercoaters”. Whoops. So I sanded the surfaces with 220-grit sandpaper and applied a final coat of primer, this time using Zinsser Cover Stain. I sanded the surface again when I was done, and then got to the real paint.

Prior to applying the actual paint color, I made sure that the top actually fit on the frame. It’s a good thing I did, because the top wasn’t having it. When I attached the new portion of the frame, I inadvertently narrowed the space at the top of the dresser. No worries! I just sanded the sides of the top quite a bit, recoated with primer, and was ready to paint again.

I used Benjamin Moore Advance Satin paint in “Once Upon a Time”. It took three coats and some touch ups to get this baby covered.

After letting the paint cure for a loooonnnng time, I attached the hardware that would allow the top of the dresser to open up and allow access to the new shelf. I used regular brass hinges on the back of the dresser and a lid support on the inside. As I experienced with my TV cabinetdresser retro-fit, this took a few tries.

To give the dresser a finishing touch, I used Brasso and the rough side of a kitchen sponge to remove some of the tarnish that had built up on the original hardware. The hardware was REALLY tarnished, and I didn’t have the patience to remove all the tarnish, so I got it to a point where it looked a little tarnished but not dirty. I actually think that look works well with this dresser.

So there you have it, the story of rebuilding/enhancing this art deco relic. This girl came to the Lucketts Market with me, got a million compliments, but didn’t leave with a new owner. I think she is pretty taste specific, but I can picture her in a bedroom with her top shelf full of pretty little china saucers and teacups full of earrings and necklaces and bracelets and other pretty things. I also think she’d look really pretty with a mirror on that underside.

Update: I realized that I didn’t bother to record that this dresser has a paper label on the back with a that shows that it was manufactured by Johnson Carper Furniture Company in Roanoke, Virginia, and that it was shipped to John Bujewicz in South River, New Jersey. It looks like the company started around 1927 and manufactured furniture through the 1930s, which confirms that this is an authentic art deco piece. Maybe someone will be looking up their family and read this blog and recognize the dresser or know how it ended up in this neck of the woods. Wouldn’t that be cool? If you are a Bujewicz and you are around my age, this might have belonged to your great grandfather or uncle, or maybe it belonged to your grandmother. I got it from a family in Alexandria (maybe they are Bujewiczes too?). Anyway, let the powers of the interweb bring us together.

Featured:

Photobucket

Lucketts Favorites: Mid-century Modern Herringbone Tables

Thank you SO much to Becky from Preparing for Peanut for sending me this picture she snapped during the market! Shortly after I found out I would be selling furniture at Lucketts, I picked up these mid-century modern tables on craigslist. The finish on both tables was in really bad shape, and had alligatored in a lot of places. The tops both had water rings on them.  They were very solid and had potential, so I was excited about the acquisition. To take off the bad finish, I sanded until my hands were about to fall off. I even bought a Dremel Multi-Max with the detail sander attachment to help sand the places where I was struggling and make the process go faster.  Once the finish was gone, I applied a coat of wood conditioner and then a coat of Minwax Antique Walnut stain. I really didn’t like the color […]

Continue Reading

Lucketts Favorites: Blue Rocking Chair

When I was getting ready for Lucketts, a lot of my friends asked me which pieces were my favorite projects. So, I thought I’d do a few posts about my favorites. I bought this rocking chair at the last minute, about a week before the market. It had a cane back and cane bottom. The cane bottom looked new, but the back looked terrible. I haven’t yet learned how to weave cane furniture, so I decided to reupholster this chair. And I was in such a rush to finish projects that I forgot to take a before picture. Bummer. Using spray primer, I primed it and painted it with Annie Sloan Chalk Paint in Provence. I mostly primed it because I didn’t know what color I wanted to paint it, but I’m glad I did because I didn’t want any of the black paint to show through anyway. After the […]

Continue Reading

Union Jack Stool

Last week I mentioned how I normally turn my nose up at trends, and this week I’m going to tell you about one that I’ve totally embraced. I know, I’m such an enigma. People are painting Union Jacks on everything. A year ago a columnist on Design*Sponge even proclaimed that Union Jack is the new black. I couldn’t help but jump on the train. Not only am I pretty darn British in heritage, the Union Jack is really cool. It’s a bold, graphic, iconic pattern with near symmetry to boot. When painted on unexpected surfaces, it adds a lot of graphic character to a room. The only thing I don’t quite understand about this trend is that it’s not really the easiest thing to do. I mean yeah, it’s straightforward, but I think free-handing something less precise would be a lot easier. It takes a long time to paint the […]

Continue Reading

Stenciled Chalk Paint Table

If you spend as much time reading furniture and design blogs as I do, you’ve probably read about Annie Sloan Chalk Paint. Well, I had read about 5 million blog posts where people use this magic chalk paint to change their furniture into a Paris flea market find look alike. I had two major issues with this: While the chalk paint was cute on romantic antiques, I was sick of seeing people apply a “cottage chic”, “parisian flea market” style to Danish midcentury modern tables. It just didn’t make sense to me. Some of the furniture looked great, but did every piece of furniture a person laid their eyes on need to be painted? And in this way? Gahhhh. It’s freaking $36 a quart. And by the way, you really have to buy wax to put over it, which is another $26.  But really my main reason was that there’s […]

Continue Reading

The Un-Caned Chair

A while back I acquired this chair at a thrift store. I liked the lines of it and knew it could look really cool with new upholstery, so I took it home and let it sit in my dining room all winter. At this point, that shouldn’t be a surprise to you. I have to admit that I twinge a bit when I watch people remove cane from furniture and replace it with upholstery. It seems like they do it with such enthusiasm, like cane is this terrible trend in furniture that we need to remove from antiques across the country. I think part of the reason for the slow extinction of cane furniture is that, at least most of the time, the cane is damaged, and few people know how to replace it. I realize that this is kind of an unreasonable rant about cane furniture, but humor me […]

Continue Reading

Herringbone Side Table

Update! My furniture restlessness continues, and this table is now for sale in my shop.  Wayyyyy back when, I showed you that the nightstands I planned to use in my room were majorly small compared to my big beautiful grownup bed. I replaced the tables with bookshelves, which are still there. One of those little tables has been sitting in my dining room (also known as Sarah’s furniture storage space, sorry roomies) for a while. I haven’t been happy with the side table (which I refinished) next to our sofa for a while, so I decided to nix it and move my ex-nightstand into our living room. Only, white painted furniture looks kind of odd in our living room because we have an ugly rental neutral on our walls, and the white looks a little dirty. And I kind of rushed to finish a paint job on this little guy […]

Continue Reading

Our TV Console Gets an Upgrade

I’ve always been intrigued by the ways that some people modify furniture for different purposes, and I’ve always wanted to take on a project of my own.  But I also have a tough time taking a nice, solid wood piece of furniture and modifying it a ton. So when I came across this decent but not super nice dresser at the Goodwill near my house and discovered that one of the drawers wasn’t in the best of shape, I knew it was a great candidate to be repurposed. The plan? Make it into a TV console to replace our blond Ikea (maybe, might as well be) TV stand in our living room. I would take the middle drawer out, add a shelf, and then convert the drawer front into a door that closes when we’re not watching TV. Perfect! Like many of my other projects, this one only took me […]

Continue Reading

Moroccan Stenciled Desk

Guys. I’m really excited to present this project to you not only because I’m pumped about the way it turned out, but because it represents a major victory against months of procrastination. It’s also a victory for No Shop January because I had already purchased all the materials to finish it forever ago, it was just a matter of getting it done. A month after we moved into our house, I bought a solid wood white desk on craigslist. It needed a lot of work, so I took it directly into our basement where I immediately got to work on it  it sat for 5 months. In my defense, I bought it in mid-October, which can kind of be the end of the furniture-revamping season on account of the shorter and colder days. But really that’s not a good excuse, because all I needed to do was sand, it’s not […]

Continue Reading

A Birthday Present for the Boy

The boy turned 24 last week, and I have to admit, I was feeling a little lame about my plans for him this year. I had set the bar pretty high in previous years, but this being his fourth (!!!) birthday we’ve spent together, I wasn’t feeling all that creative. I know, it sounds pretty lame. Especially given that two years ago I crafted him his own “GI Kyle” (duh, his name) and last year I gave him this sweet watch he’d been eyeing for months: via But this year I had to be practical. We’re both busy, we both pay rent now, and there’s stuff he actually needs. So I bought him a new pair of Sperry’s to replace his old and disgusting ones (that I also bought him two years ago) and made plans to go to the Wharf, a great seafood restaurant in Old Town, Alexandria where […]

Continue Reading